Sideforms / Edgeforms Shuttering

Spartan Sideforms / Shuttering


The Spartan Composite Sideform is specifically designed for magnetic clamp precast application / support to the steel casting bed / table. The ball lock rail strip at the rear of the sideform allows for quick and simple engagement of the magnet clamp to the Spartan Sideform simply by lowering the adaptor plate attached to the magnet clamp along the rear of the sideform. That means no bolts, screws or any other complicated and time consuming fixing – just lower the magnet clamp to the rear of the sideform and engage the magnet handle with the stripping process by lifting the magnet handle.

Timber / Lumbar Shuttering

The Titan Magnet Clamps can support the majority of all sideforms and shuttering on the market simply by using an appropriate adaptor plate (suited to the type and fixing method attached to the Titan Magnet Clamp).

There are many different ways the Titan Magnet can be attached to and support traditional timber / lumbar edgeforms or shuttering.


Ball Lock Rail Strip

 Ball Lock Rail Strips are screw fixed to the rear of the timber / lumbar sideform at the required centres or spacings. These Ball Lock Rail Strips replicate the Ball Lock Rail Strip along the rear of the Spartan Sideform. This means the same Titan Adaptor Plate is used for two purposes:
  • engaging and securing the Titan Magnet Clamp to the Trojan Sideform (with the Ball Lock Rail Strip)
  • the Spartan Sideform.


Titan Slotted Magnet Adaptor / Connector Plate

Timber / lumbar sideforms can be supported by Titan Magnet Clamps by using the Titan Slotted Magnet Adaptor Plates. The Titan magnet with the Slotted Adaptor Plate is placed alongside the timber edgeform / shuttering and a coach screw is used to secure the Slotted Adaptor Plate to the timber through the slotted hole in the Adaptor.

When the edgeform is located in correct position the Titan handles are pushed down to engage the magnet clamp and support the shuttering in place.

To release the shuttering the coach screws are simply removed.