All entries by this author

How to Use Spartan Sideform

Aug 28th, 2017 | By | Category: Truss girder production Equipment

Panel Setup It is important to ensure that the beds are clean and free of any foreign matter. Place the sideform on the precast bed in the desired position. If required, the sideform can be cut-to-length by using a fine tooth wood or aluminium saw. To ensure a smooth cut, it is important to use […]

Pallet Carousel Line

Aug 28th, 2017 | By | Category: Used machine NEWS

Pallets Carousel to manufacture floor slabs and double walls. Erected in 2015 with 37 pallet stations in 4 lines, placed in two hall segments each 20m x 55m. Comprising of: 24 pallets from NUSPL, 20pcs 3.20m x 7.20m and 4 pcs 3.45m x 7.20m, Concrete distributor with semi-automatic discharge, Vibration station, Tilting station to lift […]


Aug 28th, 2017 | By | Category: General

The Spartan Composite Sideform is specifically designed for magnetic clamp precast application / support to the steel casting bed / table. The ball lock rail strip at the rear of the sideform allows for quick and simple engagement of the magnet clamp to the Spartan Sideform simply by lowering the adaptor plate attached to the […]

Titan Magnet Clamp

Jul 18th, 2017 | By | Category: Market-NEWS

The Titan ™ Precast Magnet is arguably the strongest magnet for its size and is Significantly smaller than other Commercially available magnets: Smaller and lighter: Weighs just 3.8 kgs (8.4 lb) Stronger: Up to 1,200 kgs (2,646 lb) of pull-down force ! Rubberbase Skirt: Fully sealed the underside of the housing to protect against dirt, […]

Used precast concrete plants and equipment

Mrz 21st, 2015 | By | Category: General

If we look back at the history of using precast concrete elements in construction, Europe is a success story. We have seen an enormous speed of development in the last 40 years. Especially the emergence of new floor and wall systems together with new production technologies lead to a very high automation and quality level. […]